SPECIFICATIONS

Key points to inflate the board

-Ensure that the air valve pin is in the upright position before inflating. Also, verify that the hose is securely connected to the inflation port of the pump;

-For maximum efficiency, utilize the dual-action mode during the initial stages of inflation;

-The pressure gauge is sensitive and will indicate 1 PSI increments. The board will reach its full shape at this initial pressure;

-Once reaches approximately 7 PSI, switch to single-action mode for labor saving. Recommended pressure: 12-15 PSI.

Key points to inflate the seat

-The recommended air pressure for inflatable seats is 5-8 PSI.

-The back of the chair is padded and designed for optimal comfort when leaning.

-Adjust the length of the ropes to alter the angle of the seat, thus increasing comfort and support.

Key points to assemble the paddle

-Before turning the tension lever, ensure pull out the inner shaft first. Avoid overturning the tension lever as this can cause the tension mechanism to break;

-Ensure the correct orientation of the handle and blade. The design is ergonomic, so feel the difference in handling with various orientations;

- It's recommended that the paddle height is 4” to 6” higher than head;

- The fully assembled paddle is buoyant and can float for at least one hour. However, the single middle shaft is not buoyant

Key points to attach the leash

-When falling off the board, the water flow and the natural force of the fall can push the board away from you;

-Always remember to attach the leash to the board and your ankle or wrist. It can be a lifesaver in case you fall off the board unexpectedly;

-The leash we provide is 10 feet long, constructed with a 7mm cord TPU line and SUS swivels on both ends. It is one of the best leashes on the market, offering superior strength, reliability, and comfort.

Key points to attach the foam footrest

-Rotate the tube as needed for easier and more convenient insertion.

-Ensure that one end of the tube is slightly longer than the other.

-Insert the longer end of the tube first, then install the other end.

-Position the bag to ensure that the mobile phone camera is easily accessible for convenient shooting;

-Ensure that the inner seal is securely and completely closed;

-Align the Velcro closures to ensure a secure and tight fit.

Brand Name: CHUZHAN